← Info & Guides
Royal Enfield Bullet 350

What maintenance checks and services are required during the break-in service?

The initial break-in (first) service for the Royal Enfield Bullet 350 is scheduled at 500 km (300 miles) or 1.5 months, whichever occurs earlier (88).

The required maintenance tasks include the following:

Engine & Oil System

▼
  • Engine Oil: Drain and replace (88).
  • Engine Oil Filter Element: Replace (88).
  • Engine Oil Strainer (LH Crankcase): Clean (88).
  • Tappet Clearances (Inlet/Exhaust): Inspect and adjust (89).

Fuel & Intake System

▼
  • Intake Adapter Rubber Hose: Inspect (89).
  • Evaporative Emission Hoses: Inspect, and drain overfilled canister fluid by removing the drain plug (89).
  • Air Filter Element: Clean (clean/replace more frequently if operated in dusty conditions) (89).
  • Air Filter Box Vent Pipe: Inspect (89).
  • Injector Hose: Inspect (90).

Electrical & Ignition

▼
  • Spark Plug: Clean and adjust gap (0.7 mm to 0.8 mm) (89) (70).
  • HT Lead: Inspect for cracks or damage (89).
  • Starter Motor & Relay Connections: Inspect (90).
  • Battery Terminals: Inspect and apply petroleum jelly (90).
  • Earth Wire Eyelet Contact: Inspect (90).
  • Side Stand Switch: Inspect operation (92).

Brakes, Suspension & Steering

▼
  • Brake Fluid Level: Inspect front and rear reservoirs (91).
  • Brake Hoses & Banjo Bolts: Inspect front and rear for leaks or damage (91).
  • Brake Pads: Inspect front and rear for wear (92).
  • Front Fork Oil: Inspect for leaks or proper operation (90).
  • Steering Ball Races: Inspect play, adjust, and lubricate if required (90).
  • Swing Arm Pivot Bush & Spacer: Inspect, and lubricate if required (91).

Wheels, Tires & Drive System

▼
  • Wheel Spokes & Rim Runout: Inspect spoke tightness and runout on both front and rear rims (90).
  • Tire Wear & Condition: Inspect tread wear pattern (91).
  • Drive Chain: Clean, lubricate, and adjust slack (maintain 25–30 mm free play) (91) (69).

Controls, Lubrication & Chassis Fasteners

▼
  • Clutch Lever / Cable: Inspect and adjust free play (91).
  • Pivot Points: Lubricate side stand, center stand, gear shifter, brake pedal, pillion footrest pivots, and hand/foot levers (92).
  • Chassis Fasteners: Inspect all mounting fasteners across the vehicle for proper tightness (92).
Bullet 350 Owners Manual pages: 69, 70, 88, 89, 90, 91, 92
0
Comments (0)

Riding a Bullet 350? Keep your bike's logbook on ZAMM

ZAMM was built by Royal Enfield riders to bring everything your motorcycle needs into one place — completely free and with zero ads.

What do you get with a quick sign-up?

  • Smart Service Book: Log your services and mileage, and ZAMM automatically calculates when your Bullet 350's next service is due based on official factory intervals.
  • Fuel Consumption Tracker: Log refueling in 10 seconds and get an accurate calculation of your real-world fuel economy.
  • Upgrades & Trip Albums: Keep an organized record of every mod, accessory, or road trip — for your eyes only or shared with the community.

Sign in with one click and start logging your bike.

Comments (0)
Up to 240 chars, no links